Description
- The SSE2L allows up to 350 watts output on a cut setting
- A monopolar foot switch is included
- Refurbished SSE2Ls are available from DRE
Optional:
- REM™ (Return Electrode Monitoring)
- Bipolar foot switch is optional
- Rolling Cart
Specifications
Dimensions: 7.6″H x 11.6″W x 16.6″D | 19.3cm x 29.5cm x 42.2cm
Weight:
- 100/110 V – 32.5 lbs. (14.7 kg)
- 200/240 V – 36.5 lbs. (16.6 kg)
Maximum Wattage: 350 watts
Output Waveform:
- Cut: 500 kHz ± 10 kHz sinusoid with 65% 120 Hz modulation
- Blend: 500 kHz ± 10 kHz sinusoid with increased amplitude bursts at 20 kHz
- Coag: Pulse modulated 450 kHz damped sinusoid. Burst duration 7.0 µSec, nominal. Burst repitition 20 kHz ± 2 kHz
- Bipolar: 500 kHz ± 10 kHz sinusoid, unmodulated
Monopolar Output Characteristics:
| Mode | Maximum (Open Circuit P-P Voltage | Rate Load (Ohms) | Control Setting = 10 (Rated Load)(Watts) | Nominal Power Crest Factor @ Rated Load (typical) |
| Pure Cut | 2800 | 500 | 375 ± 25 | 1.5 CS = 5 |
| Blend | 2440 | 500 | 250 ± 25 | 2.4 CS = 7 |
| Coag | 4070 | 500 | 125 ± 15 | 6.4 CS = 10 |
| (3500 220/240V) |
Bipolar Output Characteristics:
| Mode | Maximum (Open Circuit P-P Voltage | Rate Load (Ohms) | Control Setting = 10 (Rated Load)(Watts) | Nominal Power Crest Factor @ Rated Load (typical) |
| Pure Cut | 700 | 100 | 90+15-20 | 1.8 CS = 5 |
| Blend | 640 | 100 | 85+15-20 | 2.1 CS = 5 |
| Coag | 1100 | 100 | 25+5-10 | 5.1 CS = 5 |
| (900 220/240V) |
Input Power Source: (Control setting of 10, outpu short circuit)
| 90-135 VAC, 50/60 Hz | 180-270 VAC, 50/60 Hz |
| Idle: 0.6 Amperes | Idle: 0.3 Amperes |
| Cut: 12 Amperes | Cut: 6 Amperes |
| Coag: 4 Amperes | Coag: 2 Amperes |
